Showerhead Descale

How to complete Showerhead Descale

Mineral deposits from hard water clog the tiny nozzles on a showerhead, weakening and splitting the spray over time. A vinegar soak dissolves that calcium and lime buildup chemically, so you get full pressure back without scrubbing or buying a new head.

1. Fill a sturdy plastic bag with white vinegar, enough to submerge the showerhead's face
2. Bag the head and secure it with a rubber band or zip tie so the nozzles stay soaked; no need to unscrew it
3. Leave it 1-4 hours (overnight for heavy crust), then remove the bag
4. Run hot water for a minute, then scrub stubborn nozzles with an old toothbrush and wipe each jet

Tips

• Skip vinegar on nickel, brass, or gold finishes for long soaks; it can dull the coating, so check the manufacturer first
• Gently rub each rubber nozzle with your thumb afterward to pop loose any softened deposits
• For a really bad head, unscrew it and soak fully submerged in a bowl

What counts as done

Water sprays evenly from every jet again at full pressure, with no white crust on the face.